Surface finishing
Electrolytically galvanized sheet ZE/EG
| NOMINAL COATING PER SIDE | SINGLE SPOT TEST | SINGLE SPOT TEST | SINGLE SPOT TEST | ||||
|---|---|---|---|---|---|---|---|
| Position/Type | According to DIN EN Designation |
THICKNESS [μm] |
WEIGHT [g/m²] |
WEIGHT [g/m²] |
According to VDA 239-100 Designation |
THICKNESS [μm] |
WEIGHT [g/m²] |
| Both-sides same |
EG12/12 | 1.7 – 4.5 | 12 – 32 | ||||
| Both-sides same | ZE25/25 | 2.5/2.5 | 18/18 | 12/12 | EG18/18 | 2.5 – 5.4 | 18 – 38 |
| Both-sides same | ZE50/50 | 5.0/5.0 | 36/36 | 29/29 | EG29/29 | 4.1 – 6.9 | 29 – 49 |
| Both-sides same | ZE75/75 | 7.5/7.5 | 54/54 | 47/47 | EG53/53 | 7.5 – 10.0 | 53 – 73 |
| Both-sides same | ZE100/100 | 10.0/10.0 | 72/72 | 65/65 | EG70/70 | 9.9 – 13.0 | 70 – 90 |
Hot-dip coated sheet
| Z/GI | ZF/GA | ZM | AS | ZA | |||||
|---|---|---|---|---|---|---|---|---|---|
| DIN EN | VDA 239-100 | DIN EN | VDA 239-100 | DIN EN | VDA 239-100 | DIN EN | VDA 239-100 | DIN EN | |
| Coating weight in g/m2* |
ZM70 | ZM30/30 | |||||||
| Coating weight in g/m2* | ZM80 | ||||||||
| Coating weight in g/m2* | Z100 | GI40/40 | ZF100 | GA40/40 | ZM100 | ZM40/40 | ZA95 | ||
| Coating weight in g/m2* | ZF120 | GA50/50 | ZM120 | ZM50/50 | |||||
| Coating weight in g/m2* | ZM130 | AS50 | |||||||
| Coating weight in g/m2* | Z140 | GI60/60 | ZM140 | AS60 | ZA130 | ||||
| Coating weight in g/m2* | ZM150 | ||||||||
| Coating weight in g/m2* | ZM185 | ||||||||
| Coating weight in g/m2* | Z200 | GI85/85 | ZM200 | AS80 | AS30/30 | ZA185 | |||
| Coating weight in g/m2* | ZA200 | ||||||||
| Coating weight in g/m2* | Z225 | ||||||||
| Coating weight in g/m2* | AS100 | ||||||||
| Coating weight in g/m2* | Z275 | ZM275 | AS120 | AS45/45 | ZA255 | ||||
| Coating weight in g/m2* | ZA300 | ||||||||
| Coating weight in g/m2* | ZM300 | ||||||||
| Coating weight in g/m2* | Z350 | ZM3502 | AS150 | ||||||
| Coating weight in g/m2* | Z4501 | AS200 | |||||||
| Coating weight in g/m2* | Z6001 | AS250 |
1 On request
* The Triple Spot Test applies for DIN EN and the Single Spot Test apllies for VDA 239-100
In variance from the standards, a Triple Spot Test or Single Spot Test can be ordered according to DIN EN or VDA 239-100
Z/GI: Hot-dip galvanized
ZF/GA: Galvannealed
ZM: ZM Ecoprotect®
AS: Hot-dip aluminized
ZA: galfan®
