PAS
The steel grades in the PAS series are low-carbon micro-alloyed steels which are thermomechanically rolled. The low carbon and alloying element levels, the cleanness of the steels with their low sulfur content and the special rolling process result in excellent properties including good cold formability, weldability and toughness.
The plates are usually cut from hot rolled coils in thicknesses down to around 3/8”. However, thicker and wider plates of lower strength can be made by rolling on a four-high reversing mill.
PAS Steels
- PAS 45US
- PAS 50US
- PAS 55US
- PAS 60US
- PAS 65US
- PAS 70US
- PAS 80US
- PAS 85US
- PAS 95US
- PAS 100US
Properties
- Minimum yield points up to 100 ksi (PAS 100US) with very good cold formability
- Press braking and bending with very small radii
- Notch impact energy 27 J at -40°F
- Excellent surface quality
- Outstanding weldability
Please note: Our PAS steels are distributed in Europe under the brand names referring to the metric system (the yield strength given in MPa). In some publications (like data sheets or brochures) only the European brand names and the corresponding values in the metric system may be listed.
| US | Europe |
|---|---|
| PAS 45US | PAS 315 |
| PAS 50US | PAS 355 |
| PAS 55US | PAS 380 |
| PAS 60US | PAS 420 |
| PAS 65US | PAS 460 |
| PAS 70US | PAS 500 |
| PAS 80US | PAS 550 |
| PAS 85US | PAS 600 |
| PAS 95US | PAS 650 |
| PAS 100US | PAS 700 |
